pitch diameter वाक्य
उदाहरण वाक्य
मोबाइल
- The pitch diameter is indicated as Dp in the figure shown above.
- There are several methods that are used to measure the pitch diameter.
- Truncation is achieved by using a slightly larger pitch diameter is not affected.
- It is understood to be at the standard pitch diameter unless otherwise specified.
- Hobbing machines are characterised by the largest module or pitch diameter it can generate.
- Thread class refers to the acceptable range of pitch diameter for any given thread.
- It is understood to be measured at the standard pitch diameter unless otherwise specified.
- The endmill should be the pitch diameter.
- The term module is understood to mean the pitch diameter in millimeters divided by the number of teeth.
- The same involute gear may be used under conditions that change its operating pitch diameter and pressure angle.
- The pitch diameter is useful in determining the spacing between gear centers because proper spacing of gears implies tangent pitch circles.
- It was during this era that more complicated analyses made clear the importance of variables such as pitch diameter and surface finish.
- The pitch diameters of two gears may be used to calculate the gear ratio in the same way the number of teeth is used.
- For example, a capacity machine can generate gears with a 10 in pitch diameter and usually a maximum of a 10 in face width.
- Mics with such anvils are usually called " thread mics " or " pitch mics " ( because they directly measure the pitch diameter ).
- A change of center distance is accomplished by changes in operating values for pitch diameter, circular pitch, diametral pitch, pressure angle, and tooth thicknesses or backlash.
- Thus, if the pitch diameter of a gear is 40 mm and the number of teeth 20, the module is 2, which means that there are 2 mm of pitch diameter for each tooth.
- Thus, if the pitch diameter of a gear is 40 mm and the number of teeth 20, the module is 2, which means that there are 2 mm of pitch diameter for each tooth.
- But this requirement alone does not guarantee that a bolt and a nut of the same pitch would fit together : the same requirement must separately be made for the minor and pitch diameters of the threads.
- When gear dimensions are in the metric system the pitch specification is generally in terms of " module " or " modulus ", which is effectively a length measurement across the " pitch diameter ".
- अधिक वाक्य: 1 2
pitch diameter sentences in Hindi. What are the example sentences for pitch diameter? pitch diameter English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.